Carbon fiber bonding
Structural bonding and controlled assembly for carbon fiber components — including fully non-metallic, non-magnetic configurations for medical and precision electromagnetic applications.
- Structural Bonding
- Non-Metallic Assembly
- Clean Assembly
Joints Engineered for the Structure
A carbon fiber assembly is only as reliable as its joints. We control surface preparation, bonding conditions and assembly alignment to deliver consistent, reliable subassemblies.
UNCONTROLLED ASSEMBLY
Inconsistent Surface Prep
↓
Variable Bonding Conditions
↓
Difficult Alignment Control
↓
Inconsistent Assembly
CONTROLLED BONDING & ASSEMBLY
Defined Surface Preparation
↓
Controlled Bonding & Cure
↓
Fixture-Guided Positioning
↓
Final Inspection
Bonding & Assembly Capabilities
Structural Adhesive Bonding
Carbon-fiber structural adhesive bonding with shear strength ≥25 MPa.
Multi-Material Assembly
Carbon to carbon, carbon to metal, carbon to plastic — carbon fiber joining that respects each material’s behavior.
Sandwich Panel Bonding
Carbon fiber face sheets bonded to aluminum honeycomb, PMI foam or PP honeycomb cores.
Non-Metallic Assembly
Fully non-metallic configurations with no metal inserts for non-magnetic applications.
Cleanroom Assembly
Dust-controlled assembly for precision components and sensitive applications.
Bonding & Quality Standards
Surface preparation
The bond area is abraded and cleaned. A bond fails or holds here, before any adhesive is applied.
Adhesive application
Carbon-specific structural adhesive is applied in a controlled bead and thickness.
Fixture & clamp
Parts are locked in assembly jigs, holding the joint geometry while the bond sets.
Cure under control
Time and temperature follow the adhesive specification — not habit.
Inspection
Joint, alignment and appearance are checked and recorded before the unit moves on.
From bonded joint to complete carbon fiber assembly
Most of our assemblies mix materials: carbon structure, metal inserts, trim,, and hardware. Steering wheels, manifolds, housings, and structural frames—the carbon fiber carries the load, metal carries the threads, and the bond carries the interface. Composite assembly services like these are where a part stops being a part and becomes a product you can ship.
From Bonding Plan to Finished Assembly
Assembly Review
Joint interfaces, materials and assembly requirements reviewed.
Surface Preparation
Bonding surfaces are prepared under controlled process requirements.
Bond & Cure
Structural adhesive applied with controlled curing conditions.
Assembly & Inspection
Fixture-guided positioning, dimensional inspection and final appearance check.
Bonding & Assembly FAQ
Our structural adhesive delivers ≥25 MPa shear strength on a properly prepared surface. The bond is designed per joint, and we confirm strength by test where the application requires it.
Yes. Carbon-to-metal bonding is routine for us — metal inserts, threads and bases are bonded into carbon structures using the right surface prep for each material.
Aluminum honeycomb, PMI foam and PP honeycomb.
Yes. Assembly is carried out in a dust-controlled environment for precision and cleanliness-sensitive applications.
Both. Some customers send us two parts and get one back. Others use us for full assemblies—bonding, hardware, trim, and final checks—as part of their carbon fiber fabrication services.
Whole-assembly misalignment can be controlled to ≤0.1 mm under the stated assembly process.